PRTG Manual: Main Menu Structure

Using the main menu, you can access all functions of PRTG. Following, the most important menu items are described. Often, you can either click on an item directly, or hover it to show more items.

Note: This documentation refers to the PRTG System Administrator user accessing the Ajax interface on a master node. For other user accounts, interfaces, or nodes, not all of the options might be available as described. When using a cluster installation, failover nodes are read-only by default.

The following menu items are available:

Home

Click to open the user's homepage. The default setting is PRTG's welcome page. The homepage can be changed in the user's account settings. Hover to show other menu items.

  • Dashboard 1 – Dashboard 4
    The dashboards provide different preset overviews with the status of your sensors. Choose the one that fits your needs. Dashboard 4 is optimized for mobile access. It is opened in a new window and includes no navigation in order to provide as much space as possible. Note: Dashboards are not customizable. You can create your own overview pages using the Maps feature.
  • Switch Cluster Node ›
    This option is only available if PRTG runs in Clustering mode. Show available cluster nodes. Hover to show other menu items. Follow the menu path (it is specific to your setup) to select another cluster node. The current Master node is shown in bold letters. Click on a node's name and you will leave the current node and connect to the other, showing the same page there.
  • Sitemap
    The sitemap contains a flat text view of all menu items. You can easily search for key words using the search function in your browser (usually shortcut CTRL-F).
  • Go to Mobile Web GUI
    This switches to the Mobile Web GUI optimized for low bandwidth and mobile devices. Less scripting is used for more compatibility. However, this is a read-only interface.
  • Welcome to PRTG
    Shows the welcome screen which leads you to the major sections of the web interface.
  • Make This My Homepage
    Change the page that is loaded when you click on the Home button in the main menu. Select this menu item on any page and its URL will be set as the current user's homepage immediately. This setting is user sensitive. The default homepage is /welcome.htm. You can change this setting any time by clicking on this menu item again, or by changing the Homepage URL in the My Account settings.

Devices

Click to show a group view of all your devices, starting with the Root group which contains all other groups of your setup. Hover to show other menu items.

  • Group View ›
    Shows a tree view of all probes and groups in your setup. Click to show a group view of all your devices, starting with the Root group which contains all other groups of your setup. Hover to show other menu items. Follow the menu path (it is specific to your setup) to view the devices in a specific probe or group only.
  • Device List ›
    Shows a list view of all devices in your setup. Click to show a table list of all devices in your setup. Hover to show other menu items. Choose Favorite Devices to show a list of all devices marked as Favorite. Note: To mark any device as a favorite device, select Priority/Favorite | Toggle Favorite from its context menu. Follow the menu path (it is specific to your setup) to view a table list of the devices in a specific probe or group only. In the table list appearing, you can re-sort the items by clicking on the column's header items.
  • Dependencies ›
    Shows an overview of the dependencies configured for the objects in your setup. Hover the menu item to show other menu items. Follow the menu path (it is specific to your setup) to view dependencies of the objects in a specific probe or group only.
  • Add Group
    Start an assistant which guides you through the process of adding a new group to your setup. For more information, please see section Create Objects Manually. Tip: You can create new groups much faster by choosing Add Group... from a probe's or group's context menu!
  • Add Auto-Discovery Group
    Start an assistant which guides you through the process of adding a new auto-discovery group to your setup. PRTG will create a new group and run an auto-discovery in your network in order to add devices and sensors for these devices automatically. For more information, please see section Using the Auto-Discovery Tip: You can create new groups much faster by choosing Add Auto-Discovery Group... from a probe's or group's context menu!
  • Add Device
    Start an assistant which guides you through the process of adding a new device to an existing group. During the process, you can choose if PRTG should run an auto-discover for the new device in order to add sensors automatically. For more information, please see section Create Objects Manually. Tip: You can create new devices much faster by choosing Add Device... from a group's context menu!

Libraries

Click to call the Libraries feature where you can view or add custom views of your network's status and monitoring data. For more information, please see Libraries section. Hover to show other menu items.

  • All
    Calls the Libraries feature where you can view or add custom device tree views of your network's status and monitoring data.
  • Add Library
    Lets you directly add a new library.
  • Select Library ›
    Show existing libraries. Hover to show other menu items. Follow the menu path (it is specific to your setup) to select a library.
     

Sensors

Click to show a table list of all sensors. In the table list appearing, you can re-sort the items by clicking on the column's header items. Hover to show other menu items.

  • All
    Shows a table list of all sensors. In the table list appearing, you can re-sort the items by clicking on the column's header items.
  • Add Sensor
    Start an assistant which guides you through the process of adding a new sensor to an existing device. For more information, please see section Add a Sensor. During the process, you can also choose to create a new device. This will bring you to the "Add Device" assistant you can call from the "Devices" menu directly.
  • Favorite Sensors
    Shows a table list of all sensors marked as Favorite. Note: To mark any sensor as a favorite sensor, select Priority/Favorite | Add to Favorites from its context menu.
  • Top 10 Lists ›
    This is an option to show a dashboard view with different Top 10 lists regarding best/worst uptime, Ping, bandwidth usage, website response times, memory usage, and system uptime. Click to show Top 10 lists out of all sensors. Hover to show other menu items. Follow the menu path (it is specific to your setup) to view Top 10 lists out of a specific probe or group only. Note: The sensors will be selected by default tags.
  • By Current Value ›
    This is an option to show a filtered sensor list. Hover to show other menu items. Follow the menu path to view table lists of Fastest or Slowest Ping, Port, Webpages, IMAP/POP3/SMTP, or FTP sensors as well as Most Used or Least Used Bandwidth, CPU, Disk, or Memory sensors. Note: The sensors will be selected by default tags.
  • By Current Status ›
    This is an option to show a filtered sensor list. Hover to show other menu items. Follow the menu path to view table lists of all sensors in a certain state. Select between status Up, Warning, Down, Down (Partial), Down (Acknowledged), Unusual, Paused, and Unknown. For more information about sensor states, please see Sensor States section.
  • By Uptime/Downtime ›
    This is an option to show a filtered sensor list. Hover to show other menu items. Follow the menu path to view table lists of all sensors sorted by their up- or downtime. Select between Best Uptime (%), Highest Uptime (Time), Worst Downtime (%), and Highest Downtime (Time).
  • By Group ›
    This is an option to show a filtered sensor list. Hover to show other menu items. Follow the menu path (it is specific to your setup) to view a sensor table list of a specific probe or group only.
  • By Type ›
    This is an option to show a filtered sensor list. Hover to show other menu items. Follow the menu path (it is specific to your setup) to view a sensor table list containing only sensors of one specific sensor type.
  • By Tag ›
    This is an option to show a filtered sensor list. Hover to show other menu items. Follow the alphabetical menu path (it is specific to your setup) to see available tags. Select a tag view a table list containing only sensors marked with this tag.
  • Cross Reference ›
    The cross reference shows information about all sensors including the set interval, access rights, notification trigger settings, schedule, and dependency. Click to show a sensor cross reference for all sensors. Hover to show other menu items. Follow the menu path (it is specific to your setup) to view cross reference information for sensors in a specific probe or group only, or to view them by type or tag.
  • Compare Sensors
    Calls a function to compare graphs of two monitoring objects. For more information, please see Compare Sensors section.
  • View Historic Data
    Calls a function for quick generation of sensor data reports. For more information, please see Historic Data Reports section.

Alarms

Click to show a all sensors that currently show a Down, Down (Partial), Warning, or Unusual status. In the table list appearing, you can re-sort the items by clicking on the column's header items. Hover to show other menu items.

  • All
    Shows a list of all sensors that currently show a Down, Down (Partial), Down (Acknowledged), Warning, or Unusual status.
  • Errors only
    Shows a list of all sensors that currently show a Down, Down (Partial), or Down (Acknowledged) status.
  • Warnings only
    Shows a list of all sensors that currently show a Warning status.
  • Unusuals only
    Shows a list of all sensors that currently show an Unusual status.
     

Maps

Click to call the Maps feature where you can view or add custom views of your network's status and monitoring data. For more information, please see Maps section. Hover to show other menu items.

  • All
    Calls the Maps feature where you can view or add custom views of your network's status and monitoring data.
  • Add Map
    Lets you directly add a new map.
  • Select Map ›
    Show existing maps. Hover to show other menu items. Follow the menu path (it is specific to your setup) to select a map.
     

Reports

Click to call the Reports feature where you can view or add reports of your monitoring data. For more information, please see Reports section. Hover to show other menu items.

  • All
    Calls the Reports feature where you can view or add reports of your monitoring data.
  • Add Report
    Lets you directly add a new report.
  • Select Report ›
    Show existing reports. Hover to show other menu items. Follow the menu path (it is specific to your setup) to select a report.
     

Logs

Click to show log information for all objects in your configuration, newest first. In the table list appearing, you can filter the items by using the respective options. Hover to show other menu items. For more information, please see Logs section.

  • All
    Show log information for all objects in your configuration, newest first.
  • By Group ›
    Show log information for objects in a certain group only, newest first. Hover to show other menu items. Select All, or follow the menu path (it is specific to your setup) to select a group you would like to show log information for.
  • Status Changes ›
    Show log information for certain status changes only. Hover to show other menu items. Follow the menu path to view log entries with a special value in the Status field only. Select between Up & Down (shows entries with either Up or Down in the Status field), Down, Warning, Unusual, Up, Paused/Resumed (shows entries with either Paused or Resumed in the Status field), or Acknowledged Alarms.
  • System Events ›
    Show log information regarding certain system event types only. Hover to show other menu items. Select between the following event types: Probe Related, Cluster Related, Auto-Discovery, Notifications, or Status Messages.
     

ToDos

Click to show all ToDos with important system information or action steps to take for the administrator. Every ToDo should be viewed and acknowledged. In the table list appearing, you can filter the items by using the respective options. Hover to show other menu items. For more information, please see ToDos section.

  • All
    Shows all ToDos with important system information for the administrator.
  • Open ToDos
    Shows all open ToDos, filtered by certain system event types. Hover to show other menu items. Select between the following event types: Report Related, Auto-Discovery Related, Probe Related, Cluster Related, System Errors, and New Software Version.
  • Acknowledged ToDos
    Shows all already acknowledged ToDos, filtered by certain system event types. Hover to show other menu items. Select between the following event types: Report Related, Auto-Discovery Related, Probe Related, Cluster Related, System Errors, and New Software Version.
  • Acknowledge all ToDos
    This option acknowledges all open ToDos. A warning popup is shown, asking you to confirm this action.
     

Setup

Click to show the setup page. Hover to show other menu items. For more information, please see Setup section.

Refresh (Arrows Symbol)

Click this symbol to refresh all elements on the current page to display current data. Unlike the reload function of your browser, this merely refreshes the single page elements, not the whole page. During the refresh process, this symbol flashes.

Help Center (? Symbol)

Shows the help center which supports you if you have any questions regarding your PRTG setup.

Logout (Off Symbol)

Logs out the current user and shows the login screen.

Search Box

Use the search box to find objects and reports, and other items by name or tag, or to search for help.

Context Menu

Additionally, there are Context Menus available for all objects. Right-click on an object to open it.

 

Ajax Web Interface—Basic Procedures—Topics

Other Ajax Web Interface Sections

 

Related Topics

Continue

Keywords: Home,Devices,Sensors,Alarms,Maps,Reports,Logs,ToDos,Refresh,Setup,Help Center,Logout,Search Box